Periodic overhaul is essential to ensure the best preservation of the vehicle, ensure efficient driving and avoid accidents. In addition to the inspection, in which the operation of the mechanical and electrical equipment and systems of the car is checked by a professional, it is essential that the driver also monitors the vehicle. In the brake system, for example, changing and checking the fluid level must be among the priorities, after all it is one of the components responsible for ensuring efficiency and safety when braking the car.
According to Raulincom Borges da Silva, technical assistance coordinator at TMD Friction, it is important to pay attention to the car’s signals and constantly monitor the fluid. “The brake fluid is a hygroscopic component, that is, during its life it absorbs moisture and loses its characteristics. Through the review it is possible to measure the boiling point of the fluid and even its percentage of water and from this analysis it is possible to find out if it is necessary to perform the exchange or not. Another important issue is to pay attention to the expiration date of the product, which may vary according to the manufacturer, but never apply expired “, he says.
Check out 4 signs that your car needs to change the brake fluid, according to the expert:
Fluid level
Checking the vehicle’s fluid level should be a recurring habit for the driver. If it is below the indicated level, even a little, it can affect the entire brake system and cause problems with braking. The driver must never complete the fluid, if it is out of the indicated level it is necessary to take the car for an evaluation and thus check the source of the problem.
Loss of braking efficiency
If when you step on the brake pedal you notice that you need more force than normal, or that the response time of the brake is slower, try to take the vehicle for overhaul. This failure may indicate the need for fluid change.
Panel light
Pay attention to the panel light. If the red warning light comes on, there is something wrong with the hydraulic brake system, which may be the change in pedal pressure or the level of the fluid reservoir.
Shelf life
The brake fluid is valid and therefore needs to be replaced from time to time. It is indicated that the fluid change is done every 10,000 km traveled or a year, whichever comes first.
ABOUT COBREQ
Cobreq is one of the brands of the TMD Friction group, the largest brake pad manufacturer in the world. The company develops brake linings, shoes and pads covering vehicles from the light, heavy and motorcycle lines. Located in an area of 100 thousand m², in Salto, interior of São Paulo, the factory represents one of the largest units of the TMD Friction group outside Europe. For more information access www.cobreq.com.br.
About the TMD Friction Group
TMD Friction, a group of Nisshinbo Holdings Inc., is a global leader in the manufacture of brake pads for the automotive industry. It also manufactures disc brake pads and drum brake linings for applications in various types of vehicles. Its product portfolio also includes sports brake pads, as well as friction materials for this segment. TMD Friction serves the global spare parts market through the brands Textar, Nisshinbo, Mintex, Don, Pagid and Cobreq, in addition to developing and producing friction coatings for the industry under the Cosid brands. The TMD Friction Group has four manufacturing plants in Germany, in addition to other units in Europe, the USA, Brazil, Mexico, China, Japan and South Africa. The group has more than 5,000 employees worldwide. For more information access www.tmdfriction.com.
Press information:
Alfapress Comunicações
Isabella Lima – Communication Consultant
[email protected]
(19) 99565-3247
